Husqvarna Repair Kit


The repair kit is a two-component epoxy resin adhesive

Hardens at room temperature: accelerated hardening possible by raising the temperature

Use: Particularly suitable for steel, but also other metals, wood, concrete, ceramics, glass and most plastics

The steel bond is resistant to, among other things, oil, gasoline, diesel and battery acid

Processing: Best results are achieved with clean and rough surfaces

Cut off the required amount and knead for approx. 1 minute until a uniform color is achieved

Process within 2 minutes

Initially, there does not appear to be any adhesion, but the kit should continue to be pressed on to the surface

Remove any excess material

When coating or repairing surfaces that are still wet, leak or are under water, apply pressure until adhesion begins

Smooth flat with water by hand for an even surface

Wash your hands with soap and water (or with a Turbo cleaning towelette) immediately after completing your work

Hardening commences after 5 to 10 minutes

The repaired part can be used again after as little as 60 minutes

The surfaces to be glued must be dry and free from dust and grease

Contents: 56g